beautypg.com

Warranty registration, Specifications, Electrical, safety, and emissions statements – Allied Telesis AT-PWR4 User Manual

Page 2

background image

4

5

6

Warranty Registration

Allied Telesis hardware products are covered under limited warranties. Some products
have a longer warranty coverage than others.
This AT-PWR9 power supply has a limited warranty of 5 years.
All Allied Telesis warranties are subject to the terms and conditions set out on the Allied
Telesis website at www.alliedtelesis.com/warranty.

Specifications

Physical Characteristics
Dimensions (H x W x L)

225 mm x 61 mm x 120 mm
(8.9 in x 2.4 in x 4.7 in)

Weight

0.77 kg (1.7 lbs)

Operating Temperature

0° C to 40° C (32° F to 104° F)

Storage Temperature

-25° C to 70° C (-13° F to 158° F)

Operating Relative Humidity

5% to 90% RH (non-condensing)

Storage Relative Humidity

5% to 95% RH (non-condensing)

Power Requirements
Power Rating

100-120 VAC, 50/60 HZ, 3.0 A
220-240 VAC, 50/60 HZ, 1.5 A

Agency Certifications
Electrical Safety

UL60950-1 (

c

UL

us

), EN60950-1 (TUV),

CSA 950

Immunity

EN50082-1

Emmission

EN55022-1 Class A

Electrical, Safety, and Emissions Statements

This product meets the following standards.

Copyright © 2007 Allied Telesis, Inc. All rights reserved. No part of this publication may
be reproduced without prior written permission from Allied Telesis, Inc.

U.S. Federal Communications Commission

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class A digital device

pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with this instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void

your right to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.