Allied Telesis Removable Power Supply and Fan - Manual (Page 17)

Removable Power Supply and Fan
16
The following is a diagram of PWR05 and FAN03
3. Remove the PSU, chassis fan module, FOM or the blanking plate from the
switch.
Slide the unit out slowly and carefully. Support the unit from underneath as
you remove it, to prevent it from falling.
4. For all units, with the exception of FAN03, cover empty bays with a
blanking plate, to prevent dust and debris from overheating or damaging the
switch.
Captive screw
Captive screw
PSU
Switch
Captive screw
PSU bays
PSU
Captive screw
Chassis fan
Service
access
panels