Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 15)

AT-9400 Series Gigabit Ethernet Switches Installation Guide
15
Descriptions
The following sections describe the AT-9400 Switches.
AT-9408LC/SP
Switch
The AT-9408LC/SP Layer 2+ Switch has the following hardware features:
ˆ Eight 1000Base-SX fiber optic ports with LC-duplex connectors
ˆ Four small form-factor pluggable (SFP) transceiver slots
ˆ An RJ-45 style serial terminal port for local (out-of-band) management
ˆ Status LEDs for the ports, SFP transceiver slots, and system
ˆ Redundant power supply (RPS) connector
ˆ Compact flash card slot
The front and back panels of the AT-9408LC/SP Switch are shown in
Figure 1.
Figure 1 AT-9408LC/SP Switch - Front and Back Panels
100-240VAC ~
RPS INPUT
462
AT-9408LC/SP
COMPACT FLASH FAULT
MASTER
RPS
POWER
EJECT
STATUS TERMINAL
PORT
1 2 3 4 5 6 7 8 9 10 11 12
PORT ACTIVITY
CLASS 1 LASER PRODUCT
SFP SFP SFP SFP
L/A L/A L/A L/A L/A L/A L/A L/A L/A L/A L/A L/A
LINK / ACT L/A
461
Gigabit Ethernet Switch
System LEDs
Compact Flash
Card Slot RJ-45 Style
Serial
Terminal Port
1000Base-SX Fiber Optic Ports
AC Power Connector RPS Connector
SFP Transceiver Slots
Port LED (one per port)