Allied Telesis AT-WNU300N - Manual (Page 14)

14
AT-WNU300N - IEEE802.11b/g/n 2T2R Wireless Fast USB adapter - Installation Guide
Driver and Utility Installation
To install AT-WNU300N IEEE802.11b/g/n 2T2R Wireless Fast USB adapter
driver and utility, perform the following procedure:
1.
Insert the CD-Rom which is contented in the shipping package.
2.
Run the CD-Rom. Click “Install” to start the installation, as shown in
Figure2.
Figure 2: Starting the Installation
3.
Click “Finish” when the installation is completed, as shown in Figure 3
Figure 3: Completing the Installation
4.
Remove the cover from the equipment, and plug in AT-WNU300N
IEEE802.11b/g/n 2T2R Wireless Fast USB adapter to USB port on the PC
or laptop, as shown in Figure 4.