AEG L 98485 FL - Manual (Page 19)

USING THE APPLIANCE
1. Open the water tap. 2. Connect the mains plug to the mains
socket.
ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME
For a correct operation of the weight sensor, activate the appliance and
set the programme BEFORE you put the laundry in the drum.
1. Press button 1 to activate the appli-
ance.
2. Turn the programme knob ( 2 ) to
the necessary programme or touch
one of the buttons
5 to set a memo-
rised programme. The programme in-
dicator comes on.
3. The indicator of button 6 flashes
with red colour.
4. The display shows the default tem-
perature and spin. If it is necessary,
touch button 12 and button 11 to
change the water temperature and
the spin speed.
5. If it is necessary, touch the other but-
tons to add some functions or to set a
delayed start. The display shows the
symbol of the set function and the
digit (
D ) shows the delayed time.
LOADING THE LAUNDRY
1. Open the appliance door.
2. The display (E) shows the maximum
programme load for the programme
(MAX ) and the weight of the laundry
(KG). The text bar on the display tells
to add the laundry.
3. Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance.
4. On the display the weight of the laun-
dry updates by step of kg 0.5. The
weight is indicative and changes with
the type of the laundry.
If you put more laundry than the
maximum load, the display tells
that you put more than the maxi-
mum load.
You can wash your laundry but the
energy and water consumption in-
crease.
To have the best consumption
and washing performance remove
some items.
The overload indication is availa-
ble only for programmes with a
maximum load lower than the ap-
pliance maximum load.
5. Close the door. The text bar on the
display tells the percentage of deter-
gent to use. This data is indicative
and refers to the detergent quantity
for a maximum load that the manu-
facturer recommends.
ENGLISH
19