Acer AN1600 - Manual (Page 8)

8
Acer AN1600 F1 Network Storage System Specifications
Expansion slots
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics
of the PCI-E bus segments.
PCI express Bus Segment Characteristics of PCI Express Topology
Expansion Slot # # of
slots
Type Bus
Width
1
Vol. Con.
Width Location Length
PCIe 2 PCIe Gen 2 x4 3.3V x8 Left Full height
PCIe 1 PCIe Gen 2 x8 3.3V x16 Left Full height
PCIe 2 PCIe Gen 2 x4 3.3V x8 Right Low profile
PCIe 1 PCIe Gen 2 x8 3.3V x8 Right Low profile
Acer Flex I/O 1 PCIe Gen 2 x8 3.3V x8 Left
NOTE:
1. "Bus Width" refers to the number of physical electrical lanes running to a PCIe® connector.
2. Default bus as
signment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus assignment
number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems enumerate Device
ID by bus starting from the lowest bus to the highest.
Embedded dual-port
Gigabit server
adapter (Intel
82576EB) two port
total Network interface 10Base-T
100Base-TX
1000Base-TX
Compatibility IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data transfer method Four lane (x4), 100 MHz PCI Express reference clock
Network transfer rate 10Base-T (half-duplex) 10 Mb/s
10Base-T (full-duplex) 20 Mb/s
100Base-TX (half-duplex) 100 Mb/s
100Base-TX (full-duplex) 200 Mb/s
1000Base-TX (half- and full-duplex) 2000 Mb/s
Connector RJ-45
Cable support CAT 5e wire
Virtualization
acceleration Intel I/O Acceleration Technology
Virtual Machine Device Queues (VMDq)
PCI-SIG SR-IOV implementation
Manageability NC-SI SMBus, PXE, iSCSI boot