The “initialization” menu – Audiovox MS4150RS User Manual

Page 33

The “INITIALIZATION” menu

☞

Select “

Initialisation” in one of the following

menus: “

RADIO”, “INFORMATION”, “CD” or “CD

CHANGER”.

The “INITIALISATION” menu is displayed.

The “

INITIALISATION” menu allows you to adjust the

navigation radio to your needs.

The following functions are available:

Telephone

☞

Adapt your unit’s telephone input to your car phone:

–

NONE: No car phone is connected to the unit.

–

MUTE: Playback on the current source is automatically interrupted when your car
phone is in use. For this purpose, the car phone’s muting signal must be connected
to the device (see installation instructions).

–

IN: Playback on the current source is automatically interrupted and the incoming
call is played through the car loudspeakers. For this purpose, the car phone’s mu-
ting signal and audio output must be connected to the device (see installation in-
structions).

Tel Signal:

☞

Adapt your unit’s telephone input to the muting signal of your car phone:

–

LOW: Muting signal “active low”. Radio switches to mute at 0 V.

–

HIGH: Muting signal “active high”. Radio switches to mute at 12 V.

Tel. Level:

☞

Adapt the car phone’s volume to the navigation radio’s telephone input.

✎

The volume adjustment can be set to between -30 and +30.

Beep Type:

☞

Select a confirmation/alert sound. You have the choice between 4 different sounds.

Beep Level:

☞

Set a level between 1 and 5 for the confirmation/alert sound.

Clock Settings

Setting the time, the time format and the time zone:

–

Clock Type: Select either

RDS or GPS. With GPS, the time of day is received via the

Global Positioning System in UTC. With

RDS, the time is synchronized with the data

of the currently received RDS station (the time signal transmitted by the RDS stations
may be incorrect).

–

Clock Format: Select between 12 or 24 hour format.

–

Timezone (only for GPS clock): Set the time difference to UTC (equivalent to Green-
wich Mean Time, London).

INITIALIZATION

INITIALISATION

Beep Level: 1

Scan Time: 15s

On Off Logic

Clock Settings