12 save & exit setup – Advantech PCM-9588 User Manual
Page 44
PCM-9588 User Manual
34
To Change Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press
2.
When you see “Enter Password”, enter the existing password and press
3.
You will see “Confirm Password”. Type it again, and press
4.
Select Set Password again, and at the “Enter Password” prompt, enter the new
password and press
5.
At the “Confirm Password” prompt, retype the new password, and press
6.
Select Save to CMOS and EXIT, type
To Disable Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press
2.
When you see “Enter Password”, enter the existing password and press
3.
You will see “Confirm Password”. Type it again, and press
4.
Select Set Password again, and at the”Enter Password” prompt, please don’t
enter anything; just press
5.
At the “Confirm Password” prompt, again, don’t type in anything; just press
6.
Select Save to CMOS and EXIT, type
3.2.12
Save & Exit Setup
Note!
Typing "Y" will quit the BIOS Setup Utility and save user setup value to
CMOS.
Typing "N" will return to BIOS Setup Utility.