Audiovox DT7 - Manual (Page 13)

13
Playback Preparations
Using Optional Wireless Headphones
Part Number MVIRHS
1. For best results when using wireless
headphones, sit facing the screen within 12
feet and at angles of no more than 30
degrees from center. There should be no
obstacles the between the wireless
headphones and the infrared audio
transmitter.
2. Set the IRT switch located on the left side
of the DT7 to ON.
3. If there is no sound:
A) Make sure the batteries in the headphones
are not discharged.
B Make sure the IR headphones are ON and
the volume is turned up.
C) Make sure the IRT ON/OFF switch is set to
ON.
30° 30°
Pre-Operation
1. Connect the DVD Player to the desired
power Adapter or battery.
2. Press the “POWER” button for one
second.
3. Load a disc with the label facing towards
the front. Push the disc in about ¾ of the
the way and the disc will be pulled into the
Player automatically.
4. The disc will load and automatically begin
Playback.
1. Connect any set of standard headphones
that have a 1/8 jack to either headphone
Jack on the left side of DT7.
2. Adjust the volume to the desired level
Note: Connecting the headphones will
disconnect the internal speakers.
Using Wired Headphones
IR Switch