Samsung SMT-T5040 User Manual
Page 36
GB-25
SMT-T5040
GB
GB-24
D I G I T A L T E R R E S T R I A L R E C E I V E R
SMT-T5040
OPERATING THE RECEIVER
T5040_Eng
04/06/2010
Page 24-25
OPERATING THE RECEIVER
4.3.3 Language Options
IThe “
Language Options” option allows the user to select
the desired language of the Menu, Primary Audio, and
Subtitle.
To accommodate user from different regions speaking
different languages, Menu languages are available 5
languages. (Italiano, Deutschland, Español, Français and
English)
To select the desired language menu, press the / keys
to change language then select SAVE and press the
OK
key.
4.3.4 Upgrade Channels
You can download and upgrade the channels of the receiver
through a specific channel through a specific channel
designated by the broadcaster. Place the cursor on this sub
menu and press the OK key.
Press the / keys to move the sub items and press the
/ keys to select the option.
Select OK and press the
OK key for confirmation.
Press the
MENU/EXIT keys to exit the menu.
Select the In Standby mode :
Yes or No.
Select the In Operate mode :
Yes or No.
Select the Check Time by press the / keys.
Select the Check Frequency :
Weekly or Daily.
4.3.5 Upgrade Software
You can download and upgrade the system software of the
receiver through a specific channel through a specific
channel designated by the broadcaster. The Broadcaster will
provide you with more information about that. Downloading
may take a While, ‘During downloading’ don’t turn off the
receiver.
4.3.6 Search Channel
The sub menu “
Search Channel” will enable download of the
channels automatically from the preprogrammed load, or
manual scanning channels.
To download channels automatically,
You can select Auto Search and press
OK key to perform
“Auto Search”. Auto Scanning menu will be displayed. All the
channels in the list will be automatically downloaded.
To download channels manually,
Select the Channel Number. You can select the specified
channel you want to find.
The followings are defined as a default, but optionally you
can choose it. Signal Status bar shows you if it is valid.
Input the frequency of the channel you want to find.
Select the bandwidth. You can select the value of 7 or 8
MHz.
After select option, select Search and press the OK key to
start the scanning process.
4.3.7 System Status
If you have to contact your service provider or a service
center they might ask for information available from this
menu. Place the cursor on this sub menu and press the
OK
key. The following will be the on-screen display.
4.3.8 Timezone
The “Timezone” option allows the user to select the desired
timezone.
Press the / keys to change the Local time in Time
Zone. The local time will be changed according to your
location.
GMT is referred to the standard time of Greenwich. This
cannot be changed.
Press the / keys to choose “Summer Time” option “On”
or “Off”.