Samsung SMT-T5040 - Manual (Page 28)

GB-9
SMT-T5040
GB
DESCRIPTION DESCRIPTION
GB-8 D I G I T A L T E R R E S T R I A L R E C E I V E R
SMT-T5040
Front Panel
1. This key is used to turn the receiver on and off (Standby).
2. LED & Display When the unit is turned on, the indicator lights and display on.
3. Vol+ / Vol- These keys are used to change the volume.
4. CH+ / CH- These keys are used to change the channels.
5. Infrared Sensor This is to receive the IR commands from the Remote Control Unit.
6. Card Slot Slots for smartcards.
Rear Panel
1. RF IN Use to connect a terrestrial antenna.
2. RF OUT This is used to enable connection of Analog receiver. Receiver provides
3. TV This is used to connect to your TV.
RF loop through.
4. HDMI This is used to connect to to your TV.
Output for connection to a digital amplifier. 5. SPDIF
6. USB This is used to connect to USB memory storage.
7. ETHERNET This is used to connect LAN network.
8. MODEM Modem is a terminal which shares a line with a phone using splitter.
It is used for handling PPV and transferring subscription information.
9. DC POWER This is used to connect to DC 12V / 2A adaptor.
10. POWER SWITCH This is used to power on/off Receiver.
T5040_Eng 04/03/2010 Page 8-9
1 3 4
2 5 6
1 3 2 4 5 6,7 8 9,10