Samsung UE40D5800VW User Manual

Page 6

English - 6

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the

POWER

P button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

Selecting a language

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the desired OSD (On Screen Display) language.

POWER

Selecting Store Demo or
Home Use

Press the

◄ or ► button, then press the

ENTER

E button.

Select the Home Use mode. Store Demo mode is for retail environments.
To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the TV. When the OSD volume is displayed,
press and hold

for 5 sec.

Store Demo is only for shop display. If you select it, several functions are not
able to use. Please select Home Use when you watch at home.

Selecting a country

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the appropriate country.

✎

After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.

✎

When you input the PIN number, 0-0-0-0 is not available.

✎

The option may differ depending on country.

Setting the Clock Mode

Set the Clock Mode automatically or manually.
Auto: Select the time zone (depending on the country) where you are located.
Manual: Allows you to manually set the current date and time.

Selecting an antenna

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the desired broadcasting signal.

Selecting a channel

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For more
information, refer to Channel

→ Auto Tuning.

Press the

ENTER

E button at any time to interrupt the memorisation process.

Enjoy your TV.

Select the Watch TV. Press the

ENTER

E button.

✎

If you select the Network Settings, set the network. For more information, refer to
“Network menu” in the e-Manual.

If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to
change the PIN number, use the Change PIN function.
You should do Plug & Play (

→ System) again at home although you did in shop.

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”:

MUTE

→ 8 → 2 → 4 →

POWER

(on).

VHF/UHF Antenna

Cable

TV Rear Panel

[UD5800-ZGZT]BN68-03729C.indb 6

2011-5-3 14:23:26