Samsung PS50C6500TP - Manual (Page 23)

23
English
03
Basic
Featur
es
Main Data Service buttons and their functions
Button Operation
(Data
Service)
Displays the Data Service list and
immediately starts Data Service.
BACK R Returns to the previous screen.
Colour Button
Perform functions corresponding to each
Colour button image displayed on the
screen during Data Service.
✎
Operations may differ depending on
the service provider.
Symbol
Text can be inputted using the numbers
and letters printed on and above the
numeric keys on the remote control. If
you input the numeric keys on the remote
control one by one into the blank where
the cursor is located on the text input
screen, the corresponding lettering,
numbers or special characters will be
displayed.
e.g., If you press the number 3 key in
rapid succession, then the assigned
letters (D, E, and F) and the number 3 will
alternately appear in order of input.
TEXT
Switches to teletext mode or Returns to
the previous screen.
✎
Operations may differ depending on
the service provider.
▲/▼/◄/►
Moves the Data Service menu up,
down, left and right.
OK E Runs a selected item.
EXIT e Stops a running Data Service.
Support Menu
Self Diagnosis
✎
Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.
■ Picture Test (Yes / No): Use to check for picture
problems.
■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
✎
If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
✎
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the
MUTE button.
■ Signal Information: (digital channels only) HDTV
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎
If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by network connection or downloading the latest
firmware from “www.samsung.com,” to a USB memory
device.
Current Version the software already installed in the TV.
✎
Software is represented as “Year/Month/Day_Version”.
Software Upgrade
By USB ►
By Online
By Channel
Standby Mode Upgrade
: Off
Alternative Software 2010/01/15_00000
U Move E Enter R Return
Current Version 2010/01/18_000001
[PC6500_ZT]BN68-02807E-02L03.indb 23 2010-09-29 오후 2:14:47