Samsung PS50C6500TP - Manual (Page 22)

22
English
Basic Features
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
Wireless Remote Control
Turn wireless remote controls on or off or give permission to
wireless remote controls.
¦ Picture In Picture (PIP)
PIP t
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
✎
NOTE
x For PIP sound, refer to the Sound Select
instructions.
x If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
x You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
x While Internet@TV is in operation, the PIP function
cannot be used.
x PIP settings
Main picture Sub picture
Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4,
PC
TV
■ PIP (Off / On): Activate or deactivate the PIP function.
■ Channel: Select the channel for the sub-screen.
■ Size (Х / Г ): Select a size for the sub-picture.
■ Position (à / – / — / œ): Select a position for the
sub-picture.
■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
¦ Using Data Service
Allows the user to use information (text, still
images, graphics, documents, software,
etc.) transmitted via broadcast media.
Auto Run Data Service (On / Off)
Sets whether or not to automatically run data service. Auto
Run Data Service automatically runs data service without
user intervention.
✎
If any other secondary function is under way, Auto Run
Data Service may not work.
Using Data Service
If the channel you are currently watching provides data
service, you can enjoy a variety of data services by pressing
the
or red button.
✎
Provided Data Service information may vary
depending on broadcast.
✎
While using data service, changing the channel using
the numeric buttons may not be possible depending on
the service.
1. Press the button. Select a desired service by
pressing the ▲/▼/◄/► and OK E buttons.
✎
If Auto Run Data Service is On, the data service
will automatically run with loading banner. In this
case, the
button does not work.
2. Press the red button. The data service screen will be
displayed.
3. Move to a desired option by pressing the ▲/▼/◄/►
button on the data service screen and then press
OK E. The selected service will be started.
✎
If a Colour button of a certain function appears on
the screen, you can use the offered function by
pressing the corresponded button.
4. If you press EXIT button, data service will be closed.
[PC6500_ZT]BN68-02807E-02L03.indb 22 2010-09-29 오후 2:14:46