Asus E2938 User Manual
Page 99
ASUS Commando
4-3
OPT_Fan1/2/3 Q-Fan Control [DUTY CYCLE]
Allows you to select the optional fan control mode. When this item is set to
optional fan control mode. When this item is set to
control mode. When this item is set to
[DUTY CYCLE], you can configure the Duty Cycle Mode.
Configuraiton options: [DUTY CYCLE] [Q-FAN]
You need to connect the thermal sensor cables to the OPT_TEMP1/2/3
connectors to enable this function.
Duty Cycle Mode [90%]
Allows you to set the fan duty cycle. When the OPT_Fan1/2/3 Q-Fan Control
is set to [Q-FAN], this item does not appear.
Configuraiton options: [70%] [80%] [90%] [100%]
OPT_Fan1/2/3 Q-Fan Control [Q-FAN]
When this item is set to [Q-FAN], you can configure the TargetTemp Value.
The Q-Fan detects the temperature of the fan connected to the OPT_
TEMP1/2/3 connector and adjusts the fan speed.
TargetTemp Value [32]
Allows you to set the temperature at which the optional fan starts up. When
When
the OPT_Fan1/2/3 Q-Fan Control is set to [DUTY CYCLE], this item does not
appear. Configuration options: [16] [24] [32] [40] [48] [56] [64] [72]
Configuration options: [16] [24] [32] [40] [48] [56] [64] [72]
Voltage Warning Message [Enabled]
Configuraiton options: [Disabled] [Enabled]
Vcore Voltage, FSB Termination Voltage, NB Vcore, DDR Voltage,
DDR Termination Voltage, SB Chipset Voltage, SB (SATA PCIE)
Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.