Asus E2938 - Manual (Page 97)

ASUS Commando 4-9
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Enabled]
4.6.6 Hardware Monitor
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select [Ignored] if you do not wish to display the detected
temperatures.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU Q-Fan controller.
Configuration options: [Disabled] [Enabled]
The CPU Fan Profile item appears when you enable the CPU Q-Fan Control
feature.
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Monitor
CPU Temperature [59.5ºC/139ºF]
MB Temperature [32ºC/89.5ºF]
CPU Fan Speed (RPM) [4218 RPM]
CPU Q-Fan Control [Disabled]
Chassis Fan 1 Speed [N/A]
Chassis Fan 2 Speed [N/A]
Chassis Fan 3 Speed [N/A]
Chassis Q-Fan Control [Disabled]
OPT Q-Fan an Temperature
Voltage Warning Message [Enabled]
VCORE Voltage : 1.320 V
FSB Termination Voltage : 1.232 V
NB Vcore : 1.280 V
DDR Voltage : 1.936 V
DDR Termination Voltage : 0.960 V
SB Chipset Voltage : 1.072 V
CPU Temperature
BIOS SETUP UTILITY
Power
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.