Asus E2938 User Manual
Page 54
2-30
Chapter 2: Hardware information
5. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
You can connect the 1394 cable to ASUS Q-Connector (1394, red) first, and
then install the Q-Connector (1394) to the 1394 connector onboard.
®
COMMANDO
COMMANDO IEEE 1394 connector
IE1394_2
PIN1
GND +12V TPB2- GND TP
A2-
+12V TPB2+ GND TP
A2+
6. Thermal sensor cable connectors (2-pin OPT_TEMP1/2/3)
These connectors are for temperature monitoring. Connect the thermal
sensor cables to these connectors and place the other ends to the devices,
which you want to monitor temperature. The optional fan1~3 can work with
the temperature sensors for a better cooling effect.
®
COMMANDO
COMMANDO Thermal sersor cable connectors
OPT_TEMP2
Temperature2
Ground
OPT_TEMP1
Temperature1
Ground
OPT_TEMP3
Temperature3
Ground
The thermal sensor cable is purchased separately.