Airlink101 AR325W - Manual (Page 11)

Section 6
Troubleshooting
For Cable Modem Users Only
Step 1 Go to the router’s Setup Wizard.
Step 2 At the Cable Modem setting (Dynamic IP Address), click on the Clone MAC button and click
Next.
Step 3 Proceed through the rest of the setup.
Step 4 Verify the Connection Status as described in Section 4.
For Cable Modem and DSL Users
Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes.
Step 2 Turn on the Cable/DSL modem and wait for the lights on the modem to settle down.
Step 3 Turn on the router and wait for the lights on the router to settle down.
Step 4 Turn on the computer.
Step 5 Redo the Setup Wizard.
Step 6 Verify the Connection Status as described in Section 4.
For DSL Users Only
Step 3 Complete the Setup Wizard and verify the Connection Status as described in Section 4.
Example: [email protected]
Step 1 Go to the router’s Setup Wizard.
Step 2 At the PPPoE setting, double-check the spelling of your Account name and Password. Some
ISPs require you to include the domain name along with your account name in the Account Name field.