Airlink101 AR325W User Manual

Page 10

Step 3

Once you clicked the Renew or Connect button, you should see some numbers under

WAN Status. This means you have successfully established Internet connection.

Note: If you still see all 0’s after clicking on the Renew or Connect button, try the tips in Section 6,
Troubleshooting.

Section 5

Connecting to the Router Wirelessly

Below are the default wireless settings of the router. You must configure your wireless network adapter to
the same settings in order to establish a wireless connection with the router. Please refer to your wireless
network adapter’s manual on how to configure these settings.

SSID: default
Operating Mode: Infrastructure
Authentication: Open System
Channel #: 11
WEP: disabled

You may need to restart your computer after establishing a signal strength/link quality with the router.

For information on how to configure wireless security, please refer to the User’s Manual on the provided
CD.