Samsung PS58A656T1F - Manual (Page 52)

English - 5
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1 Press the MENU button to display the menu. Press the ▲ or ▼
button to select Input, then press the ENTER button.
Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then
press the ENTER button.
Press the ▲ or ▼ button to select Setup, then press the ENTER
button.
4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then
press the ENTER button.
5 Press the ▲ or ▼ button to select On, then press the ENTER
button.

The Anynet+ (HDMI-CEC) function is enabled.

If you select Off, Anynet+ (HDMI-CEC) is disabled.

When the Anynet+ (HDMI-CEC) function is disabled, all the
Anynet+ related operations are deactivated.
Turning an Anynet+ Device Off Automatically when the TV is
Turned Off
4 Press the ▲ or ▼ button to select Auto Turn Off, then press the
ENTER button.
5 Press the ▲ or ▼ button to select Yes, then press the
ENTER button.

The Auto Turn Off function is enabled.

If you select No, the Auto Turn Off function is canceled.
Press the EXIT button to exit.

The Select Device setting of the TV remote control is to be set to
TV to use the Anynet+ function.

If you set Auto Turn Off to Yes, connected external devices are
also turned off when the TV is turned off. However, if the device is
recording, it may not be turned off.
Easy Setting
1 Press the TOOLS button on the remote control.
Press the ENTER button to select Anynet+ (HDMI-CEC).
Scanning and Switching between Anynet+ Devices
1 Press the MENU button to display the menu. Press the ▲ or ▼
button to select Input, then press the ENTER button.
Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then
press the ENTER button.
Press the ▲ or ▼ button to select Select Device, then press the
ENTER button.
4 Press the ▲ or ▼ button to select to a particular device and press
the ENTER button. It is switched to the selected device.
5 If you cannot find a device you want, press the ▲ or ▼ button to
select Searching Connections, then press the ENTER button.
The meassage Configuring Anynet+ connection... is displayed.
When searching devices completes, the connected devices are
listed in the Anynet+ menu.

Switching to the selected devices may take up to 2 minutes. You
cannot cancel the operation during the switching operation.

The time required to scan for devices is determined by the number
of connected devices.

When the device scan is complete, the number of found devices is
not displayed.

Although the TV automatically scans devices when it is turned on
using the POWER button, devices connected when the TV is on or under a specific circumstance are not
displayed in the device list. Therefore select Searching Connections menu to search devices.

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+
function. Make sure to switch to an Anynet+ device by using the TOOLS button.
Continued...
Setup
Anynet+ (HDMI-CEC) : Off
Auto Turn Off : Off
Searching Connections
Enter Return Move
Off
On
Enter Move
View TV
Select Device 
Record 
Menu on Device 
Device Operation 
Receiver :Off 
Setup 
TV P 1
Return
Enter Move
View TV
Select Device 
Record 
Menu on Device 
Device Operation 
Receiver :Off 
Setup 
TV P 1
Return
DVDR1
DVDR
DVD1
DVD
Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off : : Off
Searching Connections
Enter Return Move
No
Yes
Setup
Anynet+ (HDMI-CEC) : On 
Auto Turn Off : Yes 
Searching Connections 
Enter Return Move
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Entertainment
Sound Mode : Entertainment
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Medium
Dual I-II : Mono
Move Enter Exit
BN68-01768A.indb 52 2009-01-22 오후 2:56:58