Samsung PS58B850Y1P - Manual (Page 6)

VOL CH
CHLIST MENU FAV.CH
P.SIZE
MTS SRS P.MODE
CC S.MODE
INTE
RNET
@
Plug & Play
Select the OSD Language.
Menu Language :
U Move E Enter
English
Español
Français
English - 6
Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
Preset: Connecting the mains and antenna.
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute
while Plug & Play is running.
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
If you accidentally select the wrong country for your TV, the characters on the screen may be
wrongly displayed.
1. Press the POWER button on the remote control. Select the OSD Language. menu is
automatically displayed. Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTERE button to confirm your choice.
. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTERE button.
We recommend setting the TV to Home Use mode for the best picture in your home
environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on the
TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
. Press the ENTERE button.
Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTERE button to confirm your choice.
. Press the ▲ or ▼ button to memorize the channels of the selected connection, then press the ENTERE button.
Air : Air antenna signal.
Cable : Cable antenna signal.
. Press the ▲ or ▼ button to select the Antenna source to memorize.
Press the ENTERE button to select Start.
Digital & Analogue : Digital and Analogue channels.
Digital : Digital channels.
Analogue : Analogue channels.
The channel search will start and end automatically.
For more detailed description of selecting Cable mode, refer to Auto Store chapter.
6. The message Set the Clock Mode is displayed.
Press the ENTERE button.
Press the ▲ or ▼ button to select Auto, then Press the ENTERE button.
If you select Manual, Set current date and time is displayed.
(For a more detailed description of Manual, refer to the Setting the Time chapter)
If you have received a digital signal, the time will be set automatically.
7. The brief instruction on How to get the best performance from your new HDTV is displayed.
Press the ENTERE button.
This menu is available HD Connection Guide in the Support menu.
8. The message Enjoy your TV. is displayed.
When you have finished, press the ENTERE button.
f you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.
. Press the ENTERE button again to select Plug & Play.
. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, refer to Change PIN chapter.
The Plug & Play feature is only available in the TV mode.
N
N
N
N
N
N
N
•
•
•
•
•
N
N
N
N
❑
N
N
BN68-02149A.indb 6 2009-04-15 오후 3:05:27