AeroGarden PRO100 - Manual (Page 9)

8
Tending Your Garden
Feed Garden –
AeroGarden 3/Mini Only
Every 2 weeks, the red “Add Nutrients” light will illuminate.
Follow the rinse directions below before adding nutrients. This will keep
your Garden healthy. You will need a sink, clean counter space and a
mixing bowl or pot that is at least 4” deep and has a top opening of 5-8”.
Unplug AeroGarden and carefully
remove the Bowl from the Base and
bring it to a sink.
Remove the Grow Surface from the
Bowl and rest it in the mixing bowl.
Empty contents of Bowl into sink.
Rinse and empty Bowl. Use only water.
Fill Bowl with room-temperature
water up to “Fill To Here” and set
Bowl on counter.
Place Grow Surface back on Bowl and
replace the Bowl on Base.
Reset Nutrient Timer:
•
Press and HOLD the button on the
control panel until “Add Nutrient”
light begins to blink (about 3 seconds).
•
Release the control panel button.
•
IMMEDIATELY press and release the
control panel button again to reset
the nutrient timer.
Add 1 Mini Rose nutrient tablet.
1
2
3
4
5
6
7
8
Note: We recommend checking for bugs every time you add nutrients.
See Troubleshooting on page 17 of this Guide for details.