Samsung PN51D490A1DXZA - Manual (Page 107)

◀ ▶
English
3. Wait until the connection is automatically established.
N
If Plug & Access does not connect your TV to your wireless router a pop-
up window appears on the screen notifying you of the failure. If you want
to try using
Plug & Access again, reset the wireless router disconnect the
Samsung Wireless LAN adapter and then try again from Step 1. You can
also choose one of the other connection setup methods.
4. The network connection screen appears, and network setting is done.
5. Place the wireless router in a desired location.
N
If the wireless router settings change or you install a new wireless router you
must perform the
Plug & Access procedure again, beginning from Step 1.