Samsung BD-FM57C-ZA - Manual (Page 10)

✎ NOTES
` When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
` If the player is connected to a device that does not
support BD Wise, you cannot use the BD Wise function.
` For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
480p. The number indicates the number of
lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
Resolution according to the output
mode
• Blu-ray disc/E-contents/digital Contents
playback
Output
Setup
HDMI / connected
HDMI Mode
Blu-ray Disc
E-contents/
Digital
contents
BD Wise
Resolution of
Blu-ray Disc
1080p
Auto
Max. Resolution
of TV input
Max. Resolution
of TV input
1080p@60F
(Movie Frame : Off) 1080@60F
1080@60F
Movie Frame :
Auto (24Fs)
1080@24F 1080p@24F
1080i 1080i 1080i
720p 720p 720p
480p 480p 480p
• dVd playback
Output
Setup
HDMI / connected
HDMI Mode
BD Wise 480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
480p 480p
✎ NOTES
` If the TV you connected to the player does not
support Movie Frame or the resolution you
selected, the message "If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. Do you
want to change the resolution?" appears. If you
select Yes, the TV’s screen will go blank for 15
seconds, and then the resolution will revert to
the previous resolution automatically.
` If the screen stays blank after you have
changed the resolution, remove all discs, and
then press and hold the @ button on the top of
the player for more than 5 seconds. All settings
are restored to the factory default. Follow the
steps on the previous page to access each
mode and select the Display Setup that your TV
will support.
` When the factory default settings are restored,
all stored user BD data is deleted.
` The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto allows you to adjust the player’s HDMI output
to 24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. You
can select Movie Frame only when the player is in the HDMI 1080i or 1080p output resolution
modes.
HdmI Color Format
Lets you set the color space format for HDMI output to match the capabilities of the connected
device (TV, monitor, etc).
HdmI deep Color
Lets you output video from the HDMI OUT jack with Deep Color. Deep Color provides more accurate color
reproduction with greater color depth.
progressive mode
Lets you improve picture quality when viewing DVDs.
10