Samsung PG19NSBU-ADC - Manual (Page 37)

User’s Manual 35
On-Screen Display
Some video cards use video signals higher than 1.0V which causes the display to
be very bright.
For those video cards, use this feature to select the 1.0 V Level.
1 Push the Menu ( ) button.
2 Push the
◀
button or
▶
button until the Advanced screen is displayed.
Push the
▲
button or
▼
button to select Video Input Level.
3 Push the Menu ( ) button to open the Video Input Level
selection screen.
4 Use the
◀
or
▶
buttons to select 0.7 V or 1.0 V.
Use this menu to set your monitor to the correct type of synchronization. Select
'Separate' if the computer is sending a separate synchronization signal. Select
'Sync. on Green' if the computer expects the monitor to synchronize with the
green signal it sends. Refer to your computer or video card user's manual to
determine the correct setting.
1 Push the Menu ( ) button.
2 Push the
◀
button or
▶
button until the Advanced screen is displayed.
Push the
▲
button or
▼
button to select Sync. Input Type.
3 Push the Menu ( ) button to open the Sync. Input Type
selection screen.
4 Use the
▲
button or
▼
button to select Separate or Sync. on Green.
Menu How to adjust
Video Input Level
Sync. Input Type (Option)