Connecting the monitor – Samsung LS19HJDQHV-XAA User Manual

Page 14

Text mode
Original mode

Connecting the Monitor

Connect the DC 14V adapter for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.

2-1.

Using the D-Sub (analog) connector on the video card.
Connect the 'DVI-A to D-Sub' Cable to the DVI-I port on the back of your monitor.

2-2.

Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the 'DVI-A to D-Sub' connection cable.

2-3.

In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adapter.

Turn on your computer and monitor. If your monitor displays an image, installation is
complete.

If you properly connect your monitor using the DVI-I connector but get a blank screen, check
to see if the monitor status is set to analog. Press power button to have the monitor double-
check the input signal source.