AGFA SNAPSCAN E42 - Manual (Page 25)

Chapter 3: Configuring Buttons on Your PC 25
Modifying an Existing Configuration
It is possible to modify an existing configuration and assign it to one of the four buttons of your
SnapScan. The following example will show you how this is done.
In this example we will change the settings of the e-mail button into a configuration that will send
the scanned image to a file.
1 Open the Agfa ScanWise software.
2 Select Configure Buttons from the Tools menu.
The Configure Buttons window appears.
a. e-mail button
b. print button
c. ScanWise button
d. OCR button
3 Click Organize.
The Organize Actions window appears.