Samsung EC-WB2100BPRUS - Manual (Page 62)

Shooting in the dark
Shooting options 61
3 Select an option.
Icon Description
Off:
• The flash will not fire.
• The camera will display the shake warning when you are
shooting in low light.
Auto: The flash will fire automatically when the subject or
background is dark.
Red-eye:
• The flash will fire twice when the subject or background is dark to
reduce the red-eye effect.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Fill in:
• The flash always fires.
• The camera automatically adjusts light intensity.
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to capture more
ambient light to reveal more details in the background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning when you are
shooting in low light.
Icon Description
Red-eye Fix:
• The flash fires twice when the subject or background is dark. The
camera corrects red-eyes through its advanced software analysis.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Available options may differ depending on the shooting conditions.
• Flash options are not available if you set burst options or select Blink Detection.
• Make sure that your subjects are within the recommended distance from the
flash. (p. 126)
• If light from the flash is reflected or there is a substantial amount of dust in the
air, tiny spots may appear in your photo.
• In some modes, you can also set the flash option by pressing [m], and then
selecting Flash.