ATEN CN-6000 - Manual (Page 36)

Hotkeys
The Hotkey Setup Screen
Various configuration actions related to the keyboard, video, and mouse can be
performed via hotkey combinations. The Hotkey setup utility is accessed by
clicking the Keyboard icon on the OSD Control Panel. The actions performed by
the Hotkeys are listed in the left column; the currently defined keys that invoke
the actions are shown in the column to the right.
An explanation of the actions is given in the table, below:
Action Explanation
Exit remote location Break the connection to the CN-6000 and return to local
operation.
Adjust Video Brings up the video adjustment utility.
OSD Switch Toggles the OSD display Off and On).
Substitute Alt key Al though all other keyboard input is captured and sent to the
CN-6000, [Alt + Tab] and [Ctrl + Alt + Del] work on the local
computer. In order to implement their effects on the remote
system, a function key can be substituted for the Alt key. If
you substitute the F12 key, for example, you would use [F12
+ Tab] and [Ctrl + F12 + Del].
Note: To invoke an action, you must press and release the keys one key at a
time - do not chord the keys.
2003-11-14
CN-6000 User Manual
28