Samsung LS23A700DS-ZA - Manual (Page 53)

53
Configuring Tint
5
5 Configuring Tint
5.4 Color Tone
Adjust the general color tone of the picture.
z
This option is not available if 3D Mode is enabled.
z
This option is not available when Angle is enabled.
z
This menu is not available when Color is in Full or Intelligent mode.
5.4.1 Configuring the Color Tone Settings
1
Press any button on the front of the product to display the OSD guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Color Tone and press [ ] on the product. The following screen will
appear.
In PC mode
z
Cool2 : Set the color temperature to be cooler than Cool1 .
z
Cool1 : Set the color temperature to be cooler than Normal mode.
z
Normal : Display the standard color tone.
z
Warm1 : Set the color temperature to be warmer than Normal mode.
z
Warm2 : Set the color temperature to be warmer than Warm1 .
z
Custom : Customize the color tone.
In AV mode
z
Cool : Set the color temperature to be cooler than Normal mode.
MENU
Return Enter Move
Red
Green
Blue
Color Tone
Gamma
Cool 2
Cool 1
Normal
Warm 1
Warm 2
Custom
50
50
50
COLOR
Return Enter Move
Red
Green
Blue
Color Tone
Gamma
Cool
Normal
Warm
Custom
50
50
50
COLOR