Samsung UN32D5500RFXZA User Manual
Page 8
English - 8
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the
POWER
P button.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step in the Plug & Play sequence, press the red button on your remote.
1
Selecting the OSD
Language
Press the
◄ or ► button, and then press the ▲ or ▼ button to select
a language. Press
ENTER
E when done.
2
Selecting the usage
mode
Press the
◄ or ► button to select, and then press the
ENTER
E
button.
y
Select the Home Use mode. Store Demo mode is for retail
environments.
3
Setting the Clock
Mode
Press the
◄ or ► button. Press the ▲ or ▼ button to select Auto or Manual, and then
press
ENTER
E.
✎
If you selected Auto, you’ll select the time zone where you live next, and then select
whether to turn DST (Daylight Savings Time) On or Off.
✎
If you selected Manual, you’ll use the number buttons or
▲ or ▼ button to set the
date and time. Use the
◄ or ► button to move between entry fields.
4
Selecting search
options for auto tuning
Press the
▲ or ▼ button to select Air or Cable, and then press
ENTER
E. A check
appears on your selection. Select Next, and then press the
ENTER
E button. You can
check both if you have both connected.
✎
If you selected Cable, you’ll go to the Cable System screen. Use the
▲ or ▼ button
to select Digital or Analog, and then press
ENTER
E. Use the ▲ or ▼ button to select
the correct cable signal format - STD, HRC, or IRC - and then press
ENTER
E.
Most cable systems use STD. Select the correct cable signal format for both the
Digital and Analog systems. When done, select Search, and the press
ENTER
E.
5
Selecting and
memorizing channels
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel
→ Auto Program in the e-Manual.
✎
Press the
ENTER
E button at any time to interrupt the memorization process.
6
Setting up the network
connection
Set up your network connection. Press the
ENTER
E button to start. If you do not know
your network set up information or want to set it up later, select Watch TV. We suggest
you skip network connection setup now and refer to “Network menu” in the e-Manual for
set up requirements and instructions, and the Network Connection section of this manual
(Page 12). You can set up the network connection later using the Network menu.
7
Enjoy your TV.
Press the
ENTER
E button.
If You Want to Reset Plug & Play...
O
MENU
m → System → Plug & Play →
ENTER
E
✎
To change the TV’s settings from Store Demo to Home Use when not in Plug &Play, press the volume button on the
TV. When you see the volume in the OSD, press and hold
MENU
for 5 sec.
P
POWER
FAV.CH
CHLIST
MEDIA.P
P.MODE
S.MODE
P.SIZE
CC
MTS
INFO
SLEEP
[UD5500-ZA]BN68-03431A-Eng.indb 8
2011-02-08 �� 5:26:13