Samsung RS265LASH-XAA - Manual (Page 17)

17
INST
ALLA
TION INSTR
UCTIONS
INSTALLATION OF THE REFRIGERATOR
Check the dimensions of your entrance door to determine whether the refrigerator can pass
through it.
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Select a location with a level floor or close to it.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
• See “Separating the water supply line from the refrigerator” on the next page.
Dimension
(inch)
Width
Capacity (Cu. Ft)
Model RS253BA, RS255BA, RS257BA
25.2
without Hinge
Case Height
with Hinge
with door
Depth
without door
36"
69"
70"
35"
28"
Checking the Dimensions of your Entrance Door
Selecting the Location for the Refrigerator
Allow clearance to the right, left, back and top when installing the refrigerator.
This has the advantage of reducing power consumption.
Do not install the refrigerator where the temperature will go below 50°F(10°C).
Allow sufficient space for air circulation of the internal cooling system.
• When the refrigerator does not have enough space, the internal cooling system may not work correctly.
NOTE
inch 1
1/8 inch
1 inch
NOTE