Samsung SPH-A110ZWADYN User Manual
Page 6
9
Turning Your Phone On/Off
To turn the power on:
1. Open the phone.
2. Press the button in the upper right
corner until the screen lights up.
The "Jitterbug" logo will appear on
your screen before your phone is
ready to use. If a connection isn’t
possible, you'll see "No Service"
on the screen.
3. When you hear a dial tone, your phone
is ready to use.
If you are not able to place a call,
go to another phone and call us at
1-800-733-6632 so we can help you.
To turn the power off:
1. Open the phone.
2. Press and hold the button until the
Jitterbug tune plays. Your power is off.
SECTION
1
8
Installing the Battery
To insert the battery:
1. Slide the rounded end of
the battery into the back of
your phone, lining up the
gold contacts on the battery
with the gold contacts inside
the phone.
2. Press the top end of the
battery down until it snaps
into place.
To remove the battery:
1. If the phone is on, turn it off by opening
the phone and holding down the button
for two seconds until the Jitterbug tune
plays.
2. Slide the battery release
latch (1) on the back of the
phone toward the top end of
the phone and hold.
3. Lift the battery (2) up and away from
the phone, top end first, or simply turn
your phone over. The battery will drop out.
SECTION
1
NOTE
ALERT
Back Side
Back Side
GH68-12704A_Touch_101606.qxp 10/16/06 6:08 PM Page 11