Using block repeat, V c r o – Samsung CXN2085TPX-XAA User Manual
Page 89
C
HAPTER
F
IVE
: VCR O
PERATION
5.15
Using Block Repeat
Block repeat allows you to repeat a section of tape that you select. You can repeat this
section of tape (the “block”) from one to ten times, or endlessly.
▼
For information on viewing the
menu, see page 3.1. For information
on viewing the VCR setup menu, see
page 5.10.
You can choose to have your “block”
repeat from one to ten times, or
endlessly.
▼
3
Insert and play a
pre-recorded video
cassette tape.
For information on inserting and
playing a tape, see pages 5.1 and 5.2.
▼
4
Press the REPEAT button
at the beginning of the
“block” you want to
repeat.
“Repeat” section should be set up
at a minimum five-second interval.
▼
5
When you reach the end
of the “block,” press the
REPEAT button again.
The word “Repeat” will appear on
the screen.
To stop block repeat, press the STOP,
or POWER buttons. You can also can-
cel block repeat by fast
forwarding or rewinding to a point
outside the “block.”
The VCR will rewind the tape to beginning of the block and
repeat it.
The VCR will repeat the block as many times as the number
you set in step 2.
V C R O
P E R AT I O N
2
Press the UP/DOWN▲▼
button to select “Block
Repeat”, then press the
LEFT/RIGHT œ
œ√
√ button to
select the number of times
you want your “block” to
repeat.
Press the MENU button to
return to normal viewing.
1
Press the MENU button.
Press the UP/DOWN▲▼
button to select “VCR
Setup”, then press the
LEFT/RIGHT œ
œ√
√ button.