Specifications – Samsung SH-S183A-BEBN User Manual
Page 28
Select Languages
English
Category
SH-S183A(TS-H653A)
DVD Writer
DISC
Usable Discs
DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM,
DVD-Video, DVD+R (Dual), DVD-R (Dual), DVD-RAM
CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G)
CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD
CD-I, CD-I Bridge (Photo-CD, Video-CD),
Multisession CD (Photo-CD, CD-EXTRA, Portforio)
Disc Diameter
4.72 Inch or 3.15 Inch (120mm or 80mm)
Interface Support
Interface Port
S-ATA
Burst Transfer Rate
SATA 1.5Gbps
ACCESS TIME
(Random)
CD-ROM
110ms (Random)
DVD-ROM
130ms (Random)
Data Transfer
Speed
(Max)
Media Type
Write
Read
DVD+R
CAV 18X (MAX 24.3MB/sec)
CAV 12X (MAX 16.2MB/sec)
DVD+RW
ZCLV 8X (MAX 10.8MB/sec)
CAV 8X (MAX 10.8MB/sec)
DVD+R DUAL
ZCLV 8X (MAX 10.8MB/sec)
CAV 8X (MAX 10.8MB/sec)
DVD-R DUAL
ZCLV 8X (MAX 10.8MB/sec)
CAV 8X (MAX 10.8MB/sec)
DVD-R
CAV 18X (MAX 24.3MB/sec)
CAV 12X (MAX 16.2MB/sec)
DVD-RW
ZCLV 6X (MAX 8.1MB/sec)
CAV 8X (MAX 10.8MB/sec)
DVD-ROM(Single)
-
CAV 16X (MAX 21.6MB/sec)
DVD-ROM(Dual)
-
CAV 8X (MAX 10.8MB/sec)
CD-ROM
-
CAV 48X (MAX 7.2MB/sec)
CD-R
PCAV 48X (MAX 7.2MB/sec)
CAV 40X (MAX 6MB/sec)
US-RW
ZCLV 32X (MAX 4.8MB/sec)
CAV 40X (MAX 6MB/sec)
HS-RW
CLV 10X (MAX 1.5MB/sec)
CAV 40X (MAX 6MB/sec)
CD-RW
CLV 4X (MAX 0.6MB/sec)
CAV 40X (MAX 6MB/sec)
DVD-RAM
CAV 12X (MAX 16.2MB/sec)
CAV 12X (MAX 16.2MB/sec)
Buffer Memory
2MB
Drive Installation
Horizontal / Vertical
Operating
Environment
Temperature
41°F ~ 122°F (5°C ~ 45°C)
Humidity
5% ~ 10%(RH)
Size(Width x Height x Length)
5.34 X 1.65 X 6.69Inch(148.2 X 42 X 170mm)
Weight
750g
Note
Does not support DVD-R for Authoring
Cannot playback or record on both sides of a two-sided disc simultaneously.
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Fcc information to the user
This equipment has been tested and found to comply with the limits for a class B digital device. pursuant
to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. this equipment generates.
Uses and can radiate radio frequency energy and. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications However. there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception.
Wiich can be determined by tuming the equipment off and on. the user is encouraged to try to correct
the interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.