Samsung AN19LS9L-USM User Manual

Page 13

Connecting
Your Monitor

Installing the
Monitor Driver

Base Installation

1. Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

2. Connect the signal cable to the video port on your computer, video board, video card, or

graphics card.

3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the

pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.

4. Turn on your computer and monitor. If your monitor displays an image, installation is complete.

This manual is related to the following products: