Samsung WA56H9000AP-A2 - Manual (Page 22)

English - 22
Pre Soak
Use this function when the laundry is heavily contaminated or stained. This function improves the
wash performance by adding a Pre Soak cycle.
- If you select this function, the total cycle time is increased by 15 minutes.
- When the Pre Soak cycle starts, the washing machine repeats a wash cycle after supplying
water and then performs a 15-minute soak cycle.
- When the Pre Soak cycle is complete, the configured wash cycle starts without draining
water.
AquaJet TM
Through the strong spray and detergent water recirculation produced by the Pump of
AquaJet™, wash can be more gentle and thorough than conventional top loads.
- AquaJet™ Deep Clean: If AquaJet™ Deep Clean mode is selected, washing performance
can be further improved by addition spray action. Sufficient water quantity can be ensured by
adjusting Water Level.
cycles
aquaJet Tm
deep clean
NORMAL, HEAVY DUTY, COLORS/DARKS, SANITIZE,
ALLERGEN, PERM PRESS, ACTIVE WEAR, DEEP STEAM,
NIAGARA WASH, RINSE+SPIN
Available
WATERPROOF, BEDDING, QUICK WASH, DELICATES, SPIN Not Available
Eco Plus
This function sets the temperature somewhat lower than the typical washing cycle and extends
the wash time slightly. With laundry time slightly extended, it’s possible to keep the same level
of washing performance with cooler water. This function reduces energy consumption and
maintains the quality of the wash.
Mist Shower
Mist Shower sprays water from a nozzle that is independent of the
main water supply system. It states that is soaks the laundry with
water from the beginning of the rinse cycle and ensures an effective
wash, but it’s not part of the wash cycle, it’s part of the rinse cycle,
so this needs to state that it ensures an effective RINSE.
(If there are too many clothes, the Mist Shower does not work.)
Smart Care
This function enables you to check the status of the washing machine using a smartphone.
1. To enable the Smart Care function, press and hold the Soil
Level key for 3 seconds after turning the power on or when an
error occurs.
• The error code history is deleted after you use this function.
2. The Smart Care indicator is lit on the display.
3. Run the Smart Care app on your smart phone.
• GalaxyS, GalaxyS2, GalaxyS3, GalaxyS4, GalaxyS2(HD),
Galaxy Note, Galaxy Note2, Galaxy Note3 (Other devices
may not be normal operation).
Supported operating system: Android 2.2 or higher
• IPhone 3 G S, iPhone 4/4S, iPhone 5/5S.
Supported operating system : OS 4.3 or higher
4. Focus your smart phone’s camera on the display panel of the washing machine.
5. If the smart phone’s camera is focused on the display panel of the washing machine,
the panel and error message is automatically recognized and the error type and
countermeasures are displayed on the smart phone.
blue round object located
left to detergent dispenser
washing a load of laundry
9000HA WASH_WA56H_USER MANUAL_DC68-03133R_EN.indd 22 2014-1-23 17:01:32