Samsung EC-NV40ZSBA-US - Manual (Page 90)

<< 89 >>
Setting up the USB Driver for MAC Removing the USB Driver for Windows 98SE
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up. This camera is compatible with
MAC OS 10.1 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.
To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
● For Mac OS 10.1 or later : First complete uploading from computer to
camera and then remove the removable
disk with the Extract command.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add / Remove Programs
Properties.
6. Uninstallation is complete.