Samsung EC-NV40ZSBA-US - Manual (Page 62)

<< 61 >>
Image Adjust PictBridge
Saturation control
You can change the saturation of the image.
1. Press the [SATURATION] menu button.
2. Use the Smart button to adjust Saturation as
desired.
3. After the message [Processing!] is displayed,
the corresponding effect is applied.
4. Press the OK button to save the changed image
under a new filename.
SATURATION
CONTRAST
BRIGHTNESS
ACB
RED EYE FIX
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images directly
Movie clips and voice files cannot be printed.
■ Setting up the camera for connection to a printer
1. Connect the camera to a printer’s USB port with
the supplied USB cable.
2. Select the [Printer] menu by using the smart
button.
■ Connecting the Camera to a Printer
 If you selected [Computer], when you connected the camera to your printer,
the [Connecting Computer] message be displayed and the connection will
not be established. Select [Printer] menu, when you connect the camera to
your printer. Depending on the make and model of the printer it may not be
possible to connect your camera to the printer.
USB
Computer
Printer