Samsung FPT5894WX-XAA - Manual (Page 75)

English - 75
Auto Wall-mount adjustment (Sold separately)
(FP-T5094W)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Entering the menu
1 Press the ▲, ▼, ◄ or ► button on your remote control.
➢ The Wall Mount Adjustment screen is displayed.
➢ If the Wall Mount Adjustment screen is not displayed when clicking on a
direction button while watching your TV, use the menu to display that screen.
• Press the MENU button to display the menu. Press the ▲ or ▼ button to
select Setup, then press the ENTER button.
• Press the ▲ or ▼ button to select Wall-Mount Adjustment, then press the
ENTER button.
Remembering the Position
2 Adjust to the desired position using the ▲,▼,◄,► buttons.
➢ If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
➢ Press the INFO button to reset. Press the ◄ or ► button to select Yes, then
press the ENTER button. The position is initialized to the default setting.
3 Press the Blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position1, Position2
or Position3 in order to save the current position.
➢ To not save the current position, press the RETURN button.
➢ When selecting a save mode, you cannot use the Color buttons.
4 Press the ENTER button to save.
➢ When Position1 is selected, the message Current position saved as
Position1 is displayed.
5 Press the ENTER button.
➢ The saved Position appears on the left side of the OSD.
Moving to the remembered position
1 Complete Step 1 of Entering the menu.
2 Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
➢ You can move the wall mount to one of the 3 pre-set positions by pressing the
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
➢ If you adjust the positon after moving to a pre-set position, the position display
will disappear.
➢ For installation, refer to the Installation Manual provided with the wall mount.
➢ For product installation and the installation and moving of the wall mount, make
sure to consult a specialized installation company.
➢ This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
➢ The auto wall mount will not work when Anynet+ is operating.
TV Rear Panel
Auto Wall-Mount
EX-LINK Cable (Not supplied)
Save
Select a mode to Save.
Adjust Enter Return
Position1
Position2
Position3
Wall-Mount Adjustment
Adjust Save Center INFO
Position 1 2 3
Wall-Mount Adjustment
Adjust Save Center INFO
Position 1 2 3
Position1
RETURN
FAV.CH AUTO PROG. ADD/DEL
▲ More
Light Effect : In Watching TV ►
Energy Saving : Off ►
Screen Burn Protection ►
HDMI Black Level : Normal ►
Film Mode : Off ►
Wall-Mount Adjustment ►
▼ More
Setup T V
Enter Move Return
BN68-01094W-01Eng.indb 75 2007-10-08 ¿АИД 6:07:26