Samsung FPT5894WX-XAA - Manual (Page 41)

English - 41
1 Press the MENU button.
Press the ▲ or ▼ button to select Sound, then press the ENTER button.
2 Press the ▲ or ▼ button to select Digital Output, then press the ENTER
button.
• Dolby Digital: Dolby Digital is a digital audio coding technique that reduces the
amount of data needed to produce high quality sound. Dolby
Digital is used with digital versatile discs (DVDs), high definition
television (HDTV), and digital cable and satellite transmissions.
It has been selected as the audio standard for digital television
(DTV). Dolby Digital provides five full-bandwidth channels, front
left, front right, center, surround left, and surround right, for true
surround sound quality. A low frequency effect (LFE) channel is
included that provides the sound needed for special effects and
action sequences in movies. The LFE channel is one-tenth of the
bandwidth of the other channels and is sometimes erroneously
called the subwoofer channel. This multichannel format is known
as 5.1 channel.
• PCM: Digital data that is not compressed. Linear PCM spreads values evenly
across the range from highest to lowest, as opposed to nonlinear
(compressed) PCM which allocates more values to more important
frequency ranges.
➢ Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
3 Press the ▲ or ▼ button to select the appropriate format, then press the ENTER
button.
4 Press the EXIT button to exit.
➢ This function is supported only with HD Digital channels received via an antenna
connected to the Wireless Home AV Center.
➢ Select PCM when lip sync problems occur witth the Wireless Center set to
Dolby Digital.
➢ When an external device is connected to the COMPONENT IN or HDMI IN
jacks of the Wireless Home AV Center and is operated, the Optical jack on the
Wireless Center outputs 2 channel audio only. If you want to hear 5.1 channel
audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or
Cable/Satellite Box directly to an Amplifier or Home Theater, not the Wireless
Home AV Center.
Choosing a Digital Sound Format (Dolby Digital or PCM)
Both analog and digital audio are available from the rear-panel connectors of the Wireless Home AV Center.
The digital sound output is labeled “ Digital Audio Out(Optical)”. After connecting a digital-audio component such
as a Home Theater or Receiver, you must specify the matching output format of the Wireless Center.
Mode : Custom
Equalizer
SRS TruSurround XT : Off
Multi-Track Options
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Digital Output : Dolby Digital
Sound T V
Dolby Digital
PCM
Enter Move
Mode : Custom ►
Equalizer ►
SRS TruSurround XT : Off ►
Multi-Track Options ►
Auto Volume : Off ►
Internal Mute : Off ►
Sound Select : Main ►
Digital Output : Dolby Digital ►
Sound T V
Enter Move Return
Return
BN68-01094W-01Eng.indb 41 2007-10-08 ¿АИД 6:05:33