Samsung YP-G1CW-XAA - Manual (Page 77)

Connectivity 76
In Idle mode, open the application list and select
1
Settings → Wireless and network → Wi-Fi settings.
Select
2
WPS button connection.
Press a WPS button on the access point within 2
3
minutes.
To connect to a WLAN with a WPS PIN,
In Idle mode, open the application list and select
1
Settings → Wireless and network → Wi-Fi settings.
Select a network indicated by the WPS icon and select
2
WPS PIN.
On the access point, enter the PIN and press the start
3
button.
Add a WLAN manually
›
In Idle mode, open the application list and select
1
Settings → Wireless and network → Wi-Fi settings
→ Add Wi-Fi network.
Enter the SSID for the network and select the security
2
type.
Set the security settings depending on the selected
3
security type.
Select
4
Save.
Connect to a WLAN using a Wi-Fi
›
Protected Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a WLAN with a WPS button,