Samsung DVD-V7070-AFS - Manual (Page 17)

During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the
❿ ll
(Play/Pause) button.
1 Still
Press the
❿ ll (Play/Pause) button on the remote control during
playback.
• The picture will pause and the audio will mute.
• To resume playback, press the
❿ ll (Play/Pause) button.
• If the player is left in Pause mode for 5 minutes, it will stop
automatically.
2 Frame Advance (Step)
While in Still mode, press the F.ADV/SKIP button on the remote
control to advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press
❿ ll (Play/Pause) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3 Skip Forward/Back
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (
❿❿ l / l ➛➛ ) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the Forward/Back
(
❿❿ / ➛➛ ) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press
❿ ll (Play/Pause) button to resume normal speed.
4 Slow Motion
During playback, press the
❿ ll (Play/Pause) button to Still the
image. Then use the Search Forward ( ❿❿ ) to play in slow motion at
variable speeds.
• Each press increases the slow motion speed playback to 1/8, 1/4
or 1/2 normal speed.
• Audio is muted during slow motion playback.
• Front Panel Slow Motion Buttons - Press and hold the Forward
buttons on the front panel to activate slow motion playback.
Press the
❿ ll (Play/Pause) button to resume normal playback.
5 Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ ll
(Play/Pause) button.
• Press the ■ (Stop) button twice to completely stop playback.
The next time you press ❿ ll (Play/Pause), the disc will start over
from the beginning.
Special Playback Features
33
A/V Receiver Connections
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
• If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
1 Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
• Optical
• Coaxial
• Use whichever connection is available on your A/V Receiver.
32
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
OR
-
REC DISC MENU
F.ADV/SKIP
SETUP
/ENTER
0 100+
+
-
DVD VCR TV SELECT
VIEW
VOL CH/TRK
DISPLAY
REC DISC MENU
F.ADV/SKIP
DIGEST
TV MUTE INPUT SEL.
+
-
VOL CH/TRK
DISPLAY
REC DISC MENU
F.ADV/SKIP
SETUP
/ENTER
DIGEST
2
1
3 3
5
00044A DVD-V7070/AFR-Eng2 3/21/03 2:31 PM Page 32