Samsung SPL4225DX-XAA - Manual (Page 16)

Viewing the Picture-in-Picture
31
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1 Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
2 Move the joystick up or down to select “Source”,
then move the joystick left or right to enter.
3 Move the joystick up or down to select an external
signal, then move the joystick left or right.
4 Press the Menu button to exit.
PIP
Select On
Locate
Source
Move Adjust Exit
PIP
Select On
Locate
Source
Move Adjust Exit
PIP
VIDEO
S-VIDEO
Move Exit
30
Selecting the PIP Screen
1 Press the Menu button. Move the joystick up or down to
select “PIP”, then press the joystick to enter.
2 Move the joystick left or right to select “On”.
The PIP image will appear in the corner of the screen.
3 Press the Menu button to exit.
Note
• The PIP function operates in PC mode or Component2 mode only.
PIP
Select Off
Move Enter Exit
PIP
Select On
Locate
Source
Move Adjust Exit
Quick way to access the PIP: Just press “PIP”
on the remote control. !
Quick way to access the PIP source: Just press
“Source” in the cover on the remote control. !