Samsung DVD-V6700-XAA - Manual (Page 19)

ENG- 19
C
O N N E C T I O N S
Connecting to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a coaxial cable (not included), connect the
DIGIT
AL AUDIO OUT (COAXIAL) jack on the
back of the DVD-VCR to the DIGIT AL AUDIO IN
(COAXIAL) jack of the Amplifier.
3
T urn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the
Audio Setup menu.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 53 ~ 54)
- The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
2
Using video signal cable(s), connect the S-VIDEO
or COMPONENT
OUT jacks on the back of the
DVD-VCR to the S-VIDEO or COMPONENT IN
jack of your TV as described on pages 13 to 16.
Dolby digital or
DTS Amp.
Coaxial Cable
(not included)
01304B_V6700_XAA_Eng1_MJ 1/30/07 8:03 PM Page 19