Samsung SCH-LC11ZKAVZW - Manual (Page 16)

12
Section 4: Connecting Your Device
With your new mobile hotspot and your computer, a wireless
Internet connection can always be at your fingertips.
System Requirements
• Wi-Fi 802.11b/g/n connectivity
If you choose to connect with a USB cable, your computer
will need the following minimum system requirements:
• One Type-A USB Port
Note: Samsung 4G LTE Mobile Hotspot does not support USB
cable connections for use as a modem.
The USB cable is for charging only.
Connecting to Your Device
Note: It is recommended the battery be fully charged in order
to use your device via Wi-Fi for the first time, or connect
your device to the AC wall charger for power.
The following should occur once you press the Power Key
(
):
• Your device is powered as soon as you press the Power Key
( ) and the Power LED lights up solid green (if there is more
than a 20% charge.)
• Once your device is powered and has been activated, it
automatically connects to the Internet provided that Mobile
Broadband service is available and one or more Wi-Fi devices are
connected with your device.
• The 3G and/or 4G LTE Status LED indicator on the device lights
solid green (if there is more than a 20% charge) to indicate the
device is in service and ready to connect.