Samsung BD-F7500-ZA - Manual (Page 30)

Settings
Wireless Network
You can setup a wireless network connection in
four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices currently
connected through the player or, if applicable,
the player's current wired connection, will be
disconnected.
Ğ
Wireless - Automatic
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
v button.
4. Select Wireless in the Network Settings
screen, and then press the v button. The
player searches for and then displays a list of
the available networks.
5. Select the desired network, and then press
the v button.
6. On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing v button.
|NOTES |
\ To view the password as you enter it, use the arrow
buttons to select Show Password on the right side, and
then press v button.
7. When done, select done and then press the
v button. The player verifies the network
connection and then connects to the
network.
8. When verification is complete, select OK, and
then press the v button.
|NOTES |
\
You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1. Follow the directions in Wireless - Automatic
through Step 5.
2. The player searches for a network, and then
displays the connection failed message.
3. On the bottom of the screen, select Ip
Settings, and then press the v button.
The IP Settings screen appears.
4. Select the IP Setting field, and then press the
v button.
5. Select Enter manually in the IP Setting field,
and then press the v button.
linksys3
solugen_edu#2
iptime23
solugen_edu#1
You can connect your Blu-ray
player to the internet. Please
select which wireless network to
use.
Refresh WPS(PBC)
Network Settings
Select your network type.
Network type Wireless
Wireless network
|
30
English