Samsung FE-N500WX-XAA - Manual (Page 12)

12_ Installing the range
3. Check your adjustments
Use a spirit level to check your adjustments. Place the level diagonally on the oven rack, and check
each direction for level.
1. Check direction 1.
2. Check direction 2.
If the spirit level doesn’t show level on the rack, adjust the
leveling legs with a wrench.
FinAliZinG thE instAllAtion
• Move range close enough to the opening to plug into the receptacle.
• Slide range into position insuring that the rear left(or rear right) leg slides under the Anti-Tip bracket.
The range will sit 0” away from the back wall when properly installed.
• Carefully tip the range forward to insure that the Anti-Tip bracket engages the back brace and
prevents tip-over.
• Turn on the electrical power. Check the range for proper operation as described in the user manual.
Anti-Tip bracket
Leveling leg
DG68-00108E-01_EN
Installation-USA DG68-00108E-01_EN.indd 12 2011-03-18 �� 4:06:29