beautypg.com

Stereo connections, S-video/component video connections (for dvd) – Samsung DVDV3650V-XAX User Manual

Page 32

background image

61

60

Stereo Connections

You can connect your DVD-VCR to your home stereo system or
stereo TV and enjoy stereo sound when watching a movie or TV.

1

Connect DVD-VCR to Stereo

Using RCA cables, connect the Line Out Left and Right Audio jacks
on the back panel of the DVD-VCR to the Auxiliary Inputs on your
stereo receiver. Connect the Video Output also in case you are
using a stereo TV.

2

Set Stereo to Auxiliary Mode

Set your stereo receiver or TV to either “Aux” or “Tape” regardless
of which line input you are using for your particular device.

3

Play a Tape

Insert a DVD or Hi-Fi stereo videotape into your system. Be sure to
adjust the volume on your stereo receiver or TV. Audio will be heard
through your stereo speakers.

• If there is no stereo sound even after you have inserted a Hi-Fi

stereo videotape, press the Audio button until “Hi-Fi” appears
on the on-screen display.

Use the S-Video or Component Video connection method for the
DVD player only. The tuner and VCR can still be viewed through
the RF or line inputs.
To activate your alternative (S-Video or Component) video
selection, follow the “Alt Video Out” instructions on page 33.
Keep in mind that you can choose either S-Video or Component
only, but not both.
A superior video quality can be obtained when watching a DVD on
your DVD-VCR if your TV is equipped with S-Video or Component
Video inputs.

1

Connect S-VIDEO OUT to TV

Using an S-Video cable, connect the S-VIDEO OUT on the back
panel of your DVD-VCR to the S-Video Input on your TV.

2

Connect Component Video Out to TV

Using a component video cable, connect the COMPONENT
VIDEO OUT (Y, Pb, Pr) on the back panel of your DVD-VCR to the
Component Video Input on your TV.

3

Connect Audio Out (DVD only)

Using RCA audio cables, connect the Left/Right Line Out jacks on
the back panel of your DVD/VCR to the Left/Right Audio Line In
jacks on your TV.

• When connecting your DVD-VCR to a TV with the S-Video or

Component Video Output, make sure that you use these Line
Out jacks.

• To activate your connection, see “Alt Video Out” on page 33.

S-Video/Component Video Connections (for DVD)

To S-Video Input on Your TV

To Component Video Input

on Your TV

To Left/Right Audio Inputs

on Your TV

1

3

2

00215A DVD-V3650/XAA-Eng4 5/29/03 2:47 PM Page 60

This manual is related to the following products: