Samsung DVD-V9650-XAA - Manual (Page 62)

ENG-62
D V D O
P E R AT I O N S
Audio Options
Note
Even when PCM Down sampling is Of f,
some discs will only output down sampled
audio through the digital outputs.
Dolby/DTS Digital Out
- PCM: Converts to
PCM(2CH) audio.
- Bitstream: Outputs
Dolby/DTS Digital via the
digital output. Select
Bitstream when connecting
to a DTS/Dolby Digital
Decoder.
Dynamic Compression
- On: When the movie-
soundtracks are played at
low volume or from smaller
speakers, the system can
apply appropriate compression
to make low-level content more
intelligible and prevent dramatic
passages from getting too loud.
- Off: To select the standard
range.
PCM Down Sampling
- On: Select this when the
Amplifier connected to the
player is not 96KHz
compatible. In this case, the
96KHz signals will be down
converted to 48KHZ.
- Off: Select this when the
Amplifier connected to the
player is 96KHz compatible.
In this case, all signals will
be output without any
changes.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
▼
- Dynamic compression restrains the
dynamic range of the sound, i.e. the
difference between the loud and
quiet passages of a DVD audio track.
This is useful when watching a DVD
late at night.
Note
There is no analog audio output when you
play a DTS disc.
00956F V9650 XAA_Eng2*04 soft * 17/3/06 09:08 Page 62